RX80 Hybrid IP PBX

Hybrid VoIP PBX

RX80 is a high density, high performance hybrid IP-PBX system for small-mid size enterprises with up to 50 employees. Packaged in a 1U-high and 19-inch wide chassis, RX80 provides up to 48 ports for analog extensions and CO lines, and 40 SIP trunks as well.  RX80 can be put on any flat surface or mounted on wall.

Applications

- Low budget telephone system for mid and large-size office
- Telephone system for enterprise with branch office


Description

RX80 is low cost PBX phone system for small and medium office, support SIP trunks to connects with ITSP for least cost calls, and interconnection for branches;

Applications

- Low budget telephone system for mid and large-size office
- Telephone system for enterprise with branch office

Technical Specs

Attendant
Automated attendant
Interactive voice response (IVR)
Working  hour  and  non-working hour service
Changing  automated  attendant profile on a fly
Queuing
Operator  group  (Up  to  5 operators)
Operator console

 

Incoming call
Direct inward dialing (DID)
Direct dialing in (DDI)
Calling  line  identification  (CLI)
Distribution
Call block
Ring tone pattern selection
Call waiting


Group receiving
Extension group
Group call distribution
Group ringing

 

Extension receiving
Call forking (Ring simultaneously another pre-selected terminal)
Call forwarding (FWD)
Do not disturb (DND)
Ring pattern selection
Color ring back tone


Call pickup
Directed pickup
Group pickup
Pickup operator’s call only


Making call
Intercom call
Account code entry

Outgoing line preference
Trunk group  
Speed dialing
Hot line (Immediate, delay)  
Caller ID block
Emergency call


Outside access
Direct  inward  system  access (DISA)
Call back  
Remote  extension  setting  on phone

Call restriction
Toll restriction/Call barring  
Budget management
Extension lock
Verified code entry


Routing
Automatic route selection

 
Call transfer
Blind call transfer
Consultation call transfer
Call transfer to CO line


Call hold
Call hold
Call park
Music on hold

 

Conference
3-way calling


Caller ID
Caller ID
Incoming call log


Audible tone
Dial tone
Confirmation tone
Stutter dial tone

 

CO line (FXO)
Polarity inverse detection
Caller ID detection
Busy tone detection
DTMF outpulsing delay
Volume control


Subscriber line (FXS)

Polarity inverse generation
Caller  ID  generation  (FSK,
DTMF)
Ring cadence setting  
Ring frequency setting
Volume control
Ring volt 60V RMS
Ring Frequency 20-25Hz


Other calls features
Music on hold
Color ring back tone

SIP trunk
Registration per line
Registration per system


Tie trunk service
Direct internal dialing
Call forwarding
Call transfer
Outbound trunk sharing


Other SIP connection
Peer-to-peer SIP communication


Networking
DHCP
DNS/DDNS
PPPoE
NAT traversal
IP address filtering for security


Media stream processing
Codecs: G.711, G.729A,  
Echo cancellation
Jitter  buffer  automatic
adjustment
Busy tone detection

 

Not-Telephone Terminal

Fax  transmit  and  receive  (T.30 and T.38)
POS transmit
PBX  connectivity  (Analog  trunk
and analog extension)

 

System management
Web  management  interface
(Local and remote access)
Firmware upgrade
Log management
Configuration import and export
System  status  monitoring  and
statistics

 

 

Pictures

Hybrid  PBX system

 

Models

 

Model name Analog Extensions CO  lines Ethernet ports SIP Trunks
RX80-20S/4 20 4 2 40
RX80-8S/8 8 8 2 40
RX80-24S/8 24 8 2 40
RX80-40S/8 40 8 2 40
RX80-16S/16 16 16 2 40
RX80-32S/16 32 16 2 40
RX80-24S/24 24 24 2 40
RX80-48S 48 0 2 40
RX80-32S 32 0 2 40
RX80-24S 24 0 2 40
RX80-16S 16 0 2 40

Above Models with same software and WEB menu;